网站首页 关于我们 产品展示 新闻中心 应用案例 销售网络 在线留言 联系我们
服务分类
 选型设计
 技术支持
产品分类
 进口电磁阀
 进口蝶阀
 进口球阀
 进口调节阀
 进口疏水阀
 进口截止阀
 进口减压阀
 进口闸阀
 进口流量计
 进口止回阀
 进口真空阀
 进口低温球阀
 进口低温截止阀
 进口低温安全阀
 进口低温过滤器
 进口磁力泵
 进口隔膜泵
 进口离心泵
 进口化工泵
 进口计量泵
 进口消防泵
 进口真空泵
 进口转子泵
 业务联系
 人才招聘
 客服电话
 在线联系
首页 - 用户服务 - 技术支持 
进口蒸汽疏水阀作用与特点

进口蒸汽疏水阀作用:

美国欧可蒸汽疏水阀是用于蒸汽管网及设备中,能自动排出凝结水、空气及其它不凝结气体,并阻水蒸汽泄漏的阀门。能有效节能,并有效保护蒸汽管道中的其他装置,比如减压阀及安全阀。进口疏水阀是用于蒸汽供热设备和蒸汽管道上,能自动地排除蒸汽使用设备和管道中的冷凝水、空气及其它不可凝结的气体,并能防止蒸汽泄漏的自动阀门。蒸汽广泛地应用于工业生产和生活设施中,过程中所产生的冷凝水都需要通过蒸汽疏水阀排除,而不允许蒸汽泄漏。进口蒸汽疏水阀是管线用的疏水阀之一小体积能任意角度安装膜盒内件坚固使用寿命长。适用于蒸汽主管线伴热管网、生活采暖和小型加热设备。

进口蒸汽疏水阀特点:
1、起闭动作灵敏,在长期无凝结水形成的情况下不损失蒸汽
2、内腔所有运动部件均为不锈钢,耐磨损,耐腐蚀。
3、由于蒸汽不能到达被水封的阀座孔,所以无蒸汽损失,高效节能。
4、浮桶倒置,不会被破坏压扁,不怕水击,寿命长。
5、蒸汽疏水阀根据各种工矿条件的原理,能准确做到汽水分离,排水阻气。
6、 蒸汽疏水阀中的杠杆浮球式适用于大排水量的蒸汽系统,最大可达30T/h.
7、蒸汽疏水阀阀体可选锻造方式,焊接结构形式,适用于电厂的高温高压蒸汽场合。
8、蒸汽疏水阀内部零件全部采用不锈钢制造,经久耐用。疏水阀广泛应用于石油、化工、液化气、制药、发电、锅炉蒸汽系统、等各部门。

Inlet steam trap effect:

The United States of America Ou steam trap is used for steam pipe network and the equipment, can automatically discharge condensed water, air and other non-condensable gas and water resistance, leakage of steam valves. Effective energy saving, and effective protection of steam pipeline in the other device, such as a pressure relief valve and safety valve. Inlet steam traps are used for heating and steam pipes, can automatically eliminate steam use equipment and pipelines in the condensation water, air and other non-condensable gas, and to prevent the steam leakage automatic valve. The steam is widely used in industrial production and living facilities, produced in the process of condensate through the steam trap shooting, and does not allow the steam leakage. Steam trap is used for pipeline draining valve of small volume can be installed at any angle film box a strong long service life. Charge applies to steam line with heat pipe network, heating and small heating equipment.

Inlet steam drain valve characteristics:

1, from the closing action is sensitive, in the long run no condensed water formed in the absence of loss of steam

2, all moving parts of the internal cavity are made of stainless steel, wear resistance, corrosion resistance.

3, because the steam can not reach the valve seat hole is sealed, so no steam loss, high efficiency and energy saving.

In 4, a floating barrel invert, will not be damaged compressed, not afraid of water hammer, long life.

5, steam valve according to the various mining condition principle, can accurately achieve separation, gas drainage resistance.

In6, steam drain valve lever floating ball type suitable for large displacement of the steam system, the largest up to30T/h.

7, steam trap valve optional forging, welding structure, suitable for power plant high temperature and high pressure steam.

8, steam valve internal parts are all made of stainless steel, durable. Traps are widely used in petroleum, chemical, pharmaceutical, liquefied petroleum gas, power generation, boiler steam system, and other departments.

 
 上一条:进口电动调节阀安装技术     下一条:进口电动三通球阀技术参数
友情连接: 百度 | 仪器供应商 | Equipment Series | 离合器 | 亿商网 | 中国商业港 |
Copyright 2005 hitachifm.com All Rights Reserved. 惠州费希尔阀门有限公司 版权所有
地址:广东省惠州市大亚湾区石化大道中438号新华联广场10栋 电话:0752-5588737 粤ICP备19021819号-1